1. Opcom Remote Key Programming Software
2. Opcom Remote Key Programming Remote
3. Opcom Remote Key Programming Keyless

With OPCOM, you can learn immobilizer keys and remote keys for the central door locking You can reset and program the following immobilizer related items: ECM, BCM, IPC. You will need the vehicle security code found on the CAR-PASS You can reset and program the service interval reminder on the Astra-G, Zafira, Corsa-C, Mervia. After each key, please cycle the ignition. If you want to program two, or three keys, please repeat the procedure. Program Transponder Key – OLD With this function, you can program OLD, previously already programmed key(s) to the immobiliser system. Only one keys can be programmed at once. After each key, please cycle the ignition.

Before using

OPCOM Opel Auto Diagnostic Tool is a PC based diagnostic program. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B. The program let you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming. A Bosch Remote Key An OPCOM scanner A laptop. Remotes you can get from ebay or your local Scrap yard. Transponder Chips are identified on the chip itself, and assuming it is not a programmable one (cloned by a key cutter). OP COM you can get from Chinese sellers. Mine is from obd2diy.fr with free shipment. Start programming. OPCOM Opel Auto Diagnostic Tool is a PC based diagnostic program. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B. The program let you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.

OP COM China Clone to make key for your Astra, 4 things you need to know in advance.
1. NEW remote central locking board (PCB) to the car
2. A key to the car
3. The Security Pass for the car
4. Opcom OP-Com 2012V with Firmware V1.59
OPCOM
How to install Opcom firmware 1.59 (the following video link is offered for your reference)
http://opcom-china-clone.blogspot.com/2015/09/op-com-opcom-2010v-firmware-159.html
And then the following part is the operation guide:
Step1. Insert your NEW remote central locking board into your key;
Step2. Put the key into the ignition and turn but Do Not crank the engine;
Step3. Connect OPCOM with your car and your computer (that has already finished software installation);
Step4. Open OPCOM software and click on “DIAGNOSTICS” (mark red at picture below);
OPCOM-1
Step5. A vehicle identification menu will pop out in the next page. Select your car year;
Step6. And then select your car model;
Step7. Select “BODY” from the menu.
OPCOM-2
Step8. Select “ANTI THEFT WARNING”;
Step9. Press “PROGRAMMING” button (locate on the right hand side of the screen);
Step10. Select “SECURITY CODE” (this should be the only one available at the time).
Step11. Enter your “SECURITY CODE” and click OK.
Step12. Select “PROGRAMMING REMOTE CAR KEY”;

Opcom Remote Key Programming Software

Step13. Follow the on screen instructions.
Step14. Click “CLOSE”.

Opcom Remote Key Programming Remote

Step15. Open and close door, try locking your door and then dead lock it. Once you have done this, unlock and all should be done.

Opcom Remote Key Programming Keyless